The SumoSprings Maxim Custom Helper Springs - Rear Axle # SSR-106-54-1 you referenced are for extra heavy duty and rated for 7,000-lb capacity and are designed for your rear axle while the SumoSprings Solo Custom Helper Springs - Front Axle # SSF-106-47 are for light duty and are for the front axle of your motorhome. Both are a fit for your Class C motorhome and will help minimize sway and body roll. I do not recommend just looking at the colors of the springs as Super Springs uses their... view full answer...
I recommend using removable stabilizers like the Ultra-Fab # UF48-979004. These are adjustable from 11" - 17" high and they each have a weight capacity of 6,000 lbs.
You could try using the Lippert High-Speed Power Stabilizer Jack # LC298707 with your Class C motorhome but I am not sure if it will work very well because it will reduce your ground clearance. If you want to try this has mounting hole spacing that is 68-11/16" apart on center and it is 4-3/4" tall when retracted.
Please... view full answer...
If your power awning is a Solera powered awning the replacement cap part # LC423751 that you referenced would be correct for it. If you have a different brand though this most likely isn't what you'd need. view full answer...
For your brother's 2017 Winnebago Minnie Winnie 26A RV product # SSF-106-47 , product # SSR-106-47-1 , and product # SSR-106-54-1 are all compatible fits for a 2017 Ford E-Series Cutaway chassis.
I recommend for the rear axle product # SSF-106-47 with its 5,400lb weight capacity and for the front axle product # SSR-106-54-1 with its 1,000lb weight capacity. I've attached videos that will offer additional information for you as well. view full answer...
In order to use the Tekonsha Prodigy P3 Trailer Brake Controller part # 90195 on a 2022 Thor Vegas 24.1 you'll need the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers part # 3034-P. The plug location isn't the same on every chassis but it looks like one of our installers found this behind the coin tray in the center of the dash which you can see around the 16:40 mark in the attached video. view full answer...
Yes, the Pollak Black Plastic, 7-Pole, RV Blade-Style Trailer Socket # PK12-707E matches up with the 7-Way plug that comes with the Blue Ox 7-Wire to 6-Wire, Coiled Electrical Cord # BX88206. view full answer...
For a 2017 Class C motorhome on a Ford E-450 chassis you would need the Roadmaster Exact Center Steering Stabilizer w/ Custom Brackets # RM47MR. Before installing this steering stabilizer you'll want to make sure that your motorhome's alignment is straight otherwise the stabilizer will pull to one side and make steering harder for you. I typically test this in an empty parking lot by taking my hand off the wheel and rolling forward, using the parking lines as a guide to see if the motorhome... view full answer...
I would be happy to recommend tire chains for your side by side with 30x10x14 tires, but you will need to verify the actual diameter of your tires before ordering.
The Glacier Mud Service Snow Tire Chains # PWH2433S are a great choice for mud, snow, or ice and will work with 28x8.5x14 or 29x9.5x14 tires. You will also want the Titan Chain Multi-Arm Rubber Tire Chain Adjuster for Passenger Vehicles # TCMA1 to keep the chains snug to your tires.
If your tires are actual 30x10x14s you would... view full answer...
The Adco Deluxe Windshield Cover for Class C Motorhomes # 290-2507 is intended specifically for Ford F-Series-based motorhomes.
For an E-Series cutaway-based motorhome we do have windshield cover fits shown on the linked page, such as Hopkins Windshield Cover # HM17511. I used a 2015 model year for purposes of providing examples. view full answer...
The Reflex steering stabilizers from Roadmaster were replaced with the Exact Center which is why you're having a hard time finding the parts you're looking for. For your 2021 Ford E-450 motorhome you need this stabilizer:
- Roadmaster Exact Center Steering Stabilizer w/ Custom Brackets # RM47MR
Attached is a review video for you to check out! view full answer...
The WeatherTech # WT26DV are black and will likely fit your 2016 Thor Freedom Elite.
They're made to fit the Ford E-Series vans, which is the same cab of C-Class motorhomes like your Thor, however the motorhome manufacturers will sometimes make their own changes. I reached out to WeatherTech and they have never tested the mats on anything other than the vans but we've quite a few customers purchase these mats for the C-Class motorhome and have been very happy with them. view full answer...
If you are looking to use the Prodigy P2 Brake controller # 90885 you asked from, then you will want the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers - Ford # 3034-P which is a confirmed fit for an E-series Cutaway. The photo you gave is not of the harness you will connect to. The harness you need is often found behind a filler in the dash like pictured. view full answer...
The # RM-195225 Roadmaster Hitch Mounted Spare Tire Carrier w/ 2" Receiver Opening will work for you as long as you have the 1/4" bumper clearance indicated by your measurement.
This carrier has a towing capacity of 10,000 lbs and tongue weight of 400 lbs. Keep in mind, the use of this carrier will reduce the capacity of your existing hitch by fifty percent so you will lose the ability to tow or carry anything that exceeds its capacity.
I have attached a customer image which will be... view full answer...
Since the Draw-Tite Front Mount Trailer Hitch Receiver # 65053 installs under the front of your 2021 Ford E-450 Cutaway the hitch itself shouldn't set off any codes or alarms but if you mount anything in it like a bike rack or cargo carrier, any sensors located on the front of your E-450 will count those as an object and could set off a code if your vehicle is built with one.
We don't have any sensor relocation kits or anything for this application but your local Ford dealer might have... view full answer...
It sounds like you are experiencing a lot of sway in the 2017 Coachman Leprechaun which is somewhat of a common issue with the factory sway bars on the Ford chassis. I recommend to replace the factory sway bars with Roadmaster Front Anti-Sway Bar part # RM-1139-176 and Roadmaster Rear Anti-Sway Bar part # RM-1139-147.
The sway bars will help to keep the RV on the road when a big semi passes by bracing the frame to diminish the swaying effect. The aftermarket sway bars are far superior... view full answer...
Roadmaster steering stabilizer # RM-RBK24-RSSC will fit your RV built on a 2015 Ford E-450 van chassis. I have linked a video review for you. view full answer...
To prevent a large gas leak in the event of a line burst you would want to install a shut off valve like the GasStop Propane Emergency Shut-Off Safety Valve # GS24FR or the # GS84FR for a POL connection. This propane shut-off valve automatically turns off the gas supply if a major leak or regulator failure is detected. The pressure gauge lets you easily identify tank capacity and test for minor leaks. view full answer...
For your 2020 Thor Chateau 24F Class C motorhome you'll need the Roadmaster Rear Anti-Sway Bar # RM-1139-117 and Roadmaster Front Anti-Sway Bar # RM-1139-176.
I've attached some installation videos below to help walk you through the process if you plan on installing these yourself. view full answer...
The Lippert High-Speed Power Stabilizer Jack, # LC298707 and # LC369774 are not intended for use on motorhomes. However, you can try using it but you may find ground clearance to an issue. In addition, this has very specific mounting hole spacing on the frame of 68-11/16" from center-hole to center-hole.
An option with a much better chance of working is the Ultra-Fab Power Twin II Electric Stabilizer. These can be used on motorhomes and the correct one will depend on the lift you need... view full answer...
Go To Results